|
PCB capability |
||
|
Item |
Capability |
Description |
|
PCB Types |
Rigid PCB |
Rigid boards |
|
Layers |
1-56 Layers |
1-56Layers |
|
Material |
FR-4,Aluminum |
FR-4 (TG135,TG150,TG170),Metal base,Rogers,PTFE,low DK/DF,M6，M7，M8,TU933,TU883,EM892K |
|
Max size |
≤620x813mm/set |
620*900 (24"x35.4") /panel MAX |
|
Outline tolerance |
±0.1mm |
CNC tolerance ±0.2mm, V-cut board outline tolerance±0.1mm |
|
Board thickness |
0.3--12mm |
Min 0.3mm, Max 12mm. |
|
PCB thickness tolerance |
± 10% |
Due to the production reason(immersion copper,surface treatment,soldermask will increase the thickness), the tolerance could be +10% or ±0.1mm |
|
Min Trace Width |
3mil（0.075mm） |
3mil trace width possible, but pls try to >6mil, as the cost will higher if it is 6mil. |
|
Min Trace Distance |
3mil（0.075mm） |
3mil trace width possible, but pls try to >6mil, as the cost will higher if it is 6mil. |
|
Max.Finished Outer Layer Copper Thickness |
420um(12 oz) |
The finished PCB's outer layer copper thickness,Max 420um,12OZ |
|
Max.Finished Inner Layer Copper Thicknss |
210um(6 oz) |
The finished PCB's inner layer copper thickness,Max.6OZ=210um |
|
Min. Drill Size |
≥0.15mm |
0.15mm is the minmum mechanic drill size, Min laser drill size is 0.1mm |
|
Via Annular Ring |
≥0.15mm |
Annular ring surrounded by traces should be no less than 0.15mm |
|
Finished TH Size( Machine Drill) |
0.2--6.20mm |
Size of Finished hole is usually smaller than size in drill file because it has copper attached to increase the size. |
|
Hole Tolerance (Machine Drill) |
±0.08mm |
Hole tolerance is ±0.08mm |
|
Distance From Trace to Outline |
≥0.3mm（12mil） |
For routing,distance from trace to outline should ≥0.3mm; For V-cut this distance should be ≥0.4mm |
|
Polygon Pour With Pads |
Hatch |
We use Hatch for copper pouring，Customer who use Pads to design PCB please notice. |
|
Min. Half Hole Diameter in Half Hole Technique |
0.6mm |
Min.size for half hole diameter should be ≥ 0.6mm |
PCB Samples Show
PC
